TM 5-3805-294-23-1
0123
Table 1. Engine Will Not Crank - Continued.
Test or Inspection
Corrective Action
Malfunction
2.
Measure voltage (Volume 3,
WP 0369) between battery
negative and positive
terminals. (Volume 5,
WP 0800, Figure 5) Note
battery terminal voltage.
3.
With the aid of an assistant,
measure voltage (Volume 3,
WP 0369) between relay K34
wire terminal E03 (Volume 5,
WP 0800, Figure 212) and a
known good ground while
turning key switch to START
position for 3 seconds.
(Volume 5, WP 0794) Note
reading.
4.
Turn key switch to OFF
1.
If within 2 volts of battery
position (TM 5-3805-294-10).
terminal voltage, proceed to
Malfunction 22.
(Volume 5, WP 0794)
2.
If not within 2 volts of battery
terminal voltage, replace relay
K34. (Volume 4, WP 0529)
Restore machine to original
condition.
1.
Verify the key switch is in the
22.
Voltage Between
OFF position (TM
Starter Terminal C
5-3805-294-10). (Volume 5,
and Ground Not
Within 2 Volts of
WP 0794)
Battery Terminal
Voltage.
2.
Measure voltage (Volume 3,
WP 0369) between battery
negative and positive
terminals. (Volume 5,
WP 0800, Figure 5) Note
battery terminal voltage.
0123-9