TM 5-3805-294-23-1
0129
Table 1. Glow Plug Check - Continued.
Test or Inspection
Corrective Action
Malfunction
9.
Monitor Fuel Temperature
data point in Service
ADVISOR.
10.
When finished monitoring,
select Readings and select
Disconnect From Model(s).
(Volume 3, WP 0363)
11.
Select Yes to terminate your
readings connection. (Volume
3, WP 0363)
12.
Turn key switch to OFF
1.
If data point indicates actual
position (TM 5-3805-294-10).
fuel temperature within 9F
(13C), proceed to Malfunction
(Volume 5, WP 0794)
23.
2.
If data point does not indicate
actual fuel temperature within
9F (13C), proceed to
Malfunction 39.
1.
Replace ECU. (Volume 4,
39.
Fuel Temperature
Accuracy Check
WP 0508)
After ECU Changed.
2.
Turn key switch to ON position,
but DO NOT START ENGINE
(TM 5-3805-294-10). (Volume
5, WP 0794)
3.
Select Readings and select
Connect to Model(s). (Volume
3, WP 0363)
4.
Select Dearborn Protocol
Adapter (DPA 4+) USB for the
Readings Adapter, and select
OK. (Volume 3, WP 0363)
5.
Select Engine Control Unit
(ECU) Only. (Volume 3,
WP 0363)
6.
Under Connected Data Points,
select ECU - (shown with
engine serial number).
(Volume 3, WP 0363)
0129-16