TM 5-3805-294-23-1
0129
Table 1. Glow Plug Check - Continued.
Test or Inspection
Corrective Action
Malfunction
Visually inspect ECU
1.
If damaged or has loose pins,
33.
ECU Connector J03
connector J03 for damage and
replace ECU. (Volume 4,
Has Damage or
loose pins. (Volume 5,
Loose Pins.
WP 0508) Restore machine to
WP 0800, Figure 146)
original condition.
2.
If not damaged and does not
have loose pins, proceed to
Malfunction 34.
Visually inspect connector T05
1.
If damaged or has loose
34.
Engine Wiring
for damage and loose
sockets, repair connector T05
Harness Connector
T05 Has Damage or
sockets. (Volume 5, WP 0800,
(Volume 4, WP 0511) or
Loose Sockets.
Figure 70)
replace engine wiring
harness. (Volume 4,
WP 0510) Reconnect all
connectors and proceed to
Malfunction 23.
2.
If not damaged and does not
have loose sockets, proceed to
Malfunction 35.
1.
Remove fuel temperature
35.
Fuel Temperature
Sensor Has
sensor. (Volume 3, WP 0430)
Damage or Loose
Pins.
2.
Visually inspect fuel
1.
If damaged, replace fuel
temperature sensor for
temperature sensor. (Volume
damage and loose pins.
3, WP 0430) Reconnect all
connectors and proceed to
Malfunction 23.
2.
If not damaged, proceed to
Malfunction 36.
Measure resistance (Volume
1.
If less than 10 ohms, proceed
36.
Open Circuit
to Malfunction 37.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector T05
If greater than 10 ohms,
2.
Connector T05
socket 2 (Volume 5, WP 0800,
replace engine wiring
Socket 1 and
Figure 70) and engine wiring
harness. (Volume 4,
Engine Wiring
harness connector J03 socket
WP 0510) Reconnect all
Harness Connector
B1. (Volume 5, WP 0800,
connectors and proceed to
J03 Socket B1.
Figure 48) Note reading.
Malfunction 23.
0129-14