TM 5-3805-294-23-1
0129
Table 1. Glow Plug Check - Continued.
Test or Inspection
Corrective Action
Malfunction
7.
Under ECU - (shown with
engine serial number), select
ECU - Data List - All. (Volume
3, WP 0363)
8.
Under ECU - Data List - All,
select Fuel Temperature.
(Volume 3, WP 0363)
9.
Monitor Fuel Temperature
data point in Service
ADVISOR.
10.
When finished monitoring,
select Readings and select
Disconnect From Model(s).
(Volume 3, WP 0363)
11.
Select Yes to terminate your
readings connection. (Volume
3, WP 0363)
12.
Turn key switch to OFF
1.
If data point indicates actual
position (TM 5-3805-294-10).
fuel temperature within 9F
(13C), proceed to Malfunction
(Volume 5, WP 0794)
23.
2.
If data point does not indicate
actual fuel temperature within
9F (13C), proceed to
Malfunction 32.
1.
Verify the key switch is in the
23.
Voltage Between
OFF position (TM
Relay K16 Wire
5-3805-294-10). (Volume 5,
Terminal P04 and
Ground Not Within
WP 0794)
5 Volts of Battery
Terminal Voltage.
2.
Measure voltage (Volume 3,
WP 0369) between battery
negative and positive
terminals. (Volume 5,
WP 0800, Figure 5) Note
battery terminal voltage.
0129-10