TM 5-3805-294-23-4
0495
INSTALLATION - Continued
2.
Connect battery positive cable (Figure 2, Item 7), coolant heater wiring harness connector (Figure 2, Item 8),
glow plug wiring harness connector (Figure 2, Item 9), and starter positive cable (Figure 2, Item 10) terminals
to bottom of battery relay K19 (Figure 2, Item 11) with two washers (Figure 2, Item 6) and screws (Figure 2,
Item 5).
3.
Connect battery wiring harness (Figure 2, Item 14) and battery wiring harness (Figure 2, Item 15) at top of
battery relay K19 (Figure 2, Item 11) with two washers (Figure 2, Item 13) and screws (Figure 2, Item 12).
4.
Install three washers (Figure 2, Item 2), screws (Figure 2, Item 1) and cover (Figure 2, Item 3) to frame (Figure
2, Item 4).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect negative battery cable. (WP 0521)
2.
Perform the Standard Follow-On Maintenance Instructions. (Volume 3, WP 0384)
END OF TASK
END OF WORK PACKAGE
0495-4