TM 5-3805-294-23-4
FIELD MAINTENANCE
TRAVEL ALARM WIRING HARNESS REPLACEMENT
INITIAL SETUP:
Equipment Condition (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Negative battery cable disconnected. (WP 0521)
Pump compartment lower access cover removed.
(Volume 5, WP 0796, Table 2, Item 119)
Engine compartment lower access cover removed.
Materials/Parts
Tags (Volume 5, WP 0797, Table 1, Item 52)
Tie Wraps (Volume 5, WP 0797, Table 1, Item
56)
Time to Complete
1.0 Hour(s)
Personnel Required
Construction Equipment Repairer 91L (1)
References
TM 5-3805-294-24P: Fig. 143 (Volume 5,
WP 0794)
DA FORM 5988-E or DA FORM 2404 (Volume 5,
WP 0794)
Equipment Condition
Machine safely parked and shut down
(TM 5-3805-294-10). (Volume 5, WP 0794)
REMOVAL
WARNING
Ensure electrical power is off prior to working on all electrical connections. Prior to working
on or around vehicle, remove all jewelry, such as rings, ID tags, bracelets, etc. Jewelry, and
tools can catch on equipment, contact positive electrical circuits, and cause a direct short,
severe burns, or electrical shock. Failure to comply may result in injury or death to personnel.
NOTE
Tag and mark wires, connectors, and wiring harnesses prior to removal to ensure proper
installation.
Note position of each tie wrap and remove as required.
Note routing of wiring harness prior to removal to ensure proper installation.
1.
Disconnect travel alarm harness connector H4 (Figure 1, Item 1) from travel alarm electrical connector (Figure
1, Item 2) in pump compartment.
0619-1