TM 5-3805-294-23-4
0631
REMOVAL - Continued
CAUTION
Wipe area clean around all fluid connections prior to removal. Cap and plug all hoses, lines,
fittings, and ports during removal to prevent contamination of system components. Systems
must be kept clean from contaminants. Failure to comply may result in damage to equipment.
NOTE
Position drain pan under hoses being removed.
Tag and mark hoses prior to removal to ensure proper installation.
Note position of each tie wrap and remove as required.
Hoses and components are shown removed for clarity. Components other than called-
out components do not need to be removed.
1.
Remove hose (Figure 1, Item 1) from pilot signal manifold (Figure 1, Item 2).
0631-2