TM 5-3805-294-23-4
FIELD MAINTENANCE
BOOM LUBRICATION SYSTEM REPLACEMENT
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
LO 5-3805-294-13 (Volume 5, WP 0794)
DA FORM 5988-E or DA FORM 2404 (Volume 5,
(Volume 5, WP 0796, Table 2, Item 119)
WP 0794)
Gloves, Rubber (Volume 5, WP 0796, Table 2,
Item 55)
Grease Gun (Volume 5, WP 0796, Table 2, Item
Equipment Condition
55)
Machine safely parked and shut down
(TM 5-3805-294-10). (Volume 5, WP 0794)
Materials/Parts
Grease, Automotive and Artillery, GAA
Time to Complete
(Volume 5, WP 0797, Table 1, Item 11)
0.6 Hour(s)
Rags, Wiping (Volume 5, WP 0797, Table 1, Item
34)
Tags (Volume 5, WP 0797, Table 1, Item 52)
Tie Wraps (Volume 5, WP 0797, Table 1, Item
56)
Personnel Required
Construction Equipment Repairer 91L (1)
References
TM 5-3805-294-24P: Fig. 206 (Volume 5,
WP 0794)
REMOVAL
CAUTION
Wipe area clean around all fluid connections prior to removal. Cap and plug all hoses, lines,
fittings, and ports during removal to prevent contamination of system components. Systems
must be kept clean from contaminants. Failure to comply may result in damage to equipment.
NOTE
Tag and mark hoses and fittings prior to removal to ensure proper installation.
Note position of each tie wrap and remove as required.
1.
Remove two fittings (Figure 1, Item 1) from boom weldment (Figure 1, Item 2).
0651-1