TM 5-2420-230-24-1
Make sure personnel are clear of wheels
before turning steering wheel. Failure to
comply may result in injury or death to
personnel.
(4)
Turn steering wheel to full left.
(5)
Ensure clearance is 0.04 in. (1 mm) between
left mechanical stop (25) and inside edge of
left drive head assembly (26).
(6)
Screw left adjusting screw (23) into power
steering gear box (1) until system relieves
pressure. An audible sound will be heard.
(7)
Turn steering wheel to full right.
(8)
Ensure clearance is 0.04 in. (1 mm) between
right mechanical stop (27) and inside edge of
right drive head assembly (28).
(9)
Screw right adjusting screw (24) into power
steering gear box (1) until system relieves
pressure. An audible sound will be heard
when pressure is relieved.
d. Follow-On Maintenance.
(1)
Functionally test power steering gear box
(2)
Shut OFF engine (TM 5-2420-230-10).
(3)
Remove "Do Not Operate" tag from ignition
switch (TM 5-2420-230-10).
END OF TASK
Change 1
5-20
