TM 5-2420-230-24-1
(6)
Ensure power steering fluid reservoir is filled with clean oil (Para 5-5).
(6.1) Install radiator (Para 9-5).
(7)
Start engine (TM 5-2420-230-10).
(8)
Bleed power steering system (Para K-3).
(9)
Shut OFF engine (TM 5-2420-230-10).
(10) Install pitman arm (Para K-5).
c. Adjustment (Setting Hydraulic Stops).
NOTE
Hydraulic stop adjustment is only required for a new steering gearbox.
(1)
Start engine (TM 5-2420-230-10).
Do not attempt to back out screws while
wheels are in motion. Failure to comply may
result in injury or death to personnel.
Do not back out adjusting screws completely
or hydraulic oil will be released.
(2)
Back out left adjusting screw (23) from
power steering gear box (1) to no more than
0.25 in. (6 mm).
(3)
Back out right adjusting screw (24) from
power steering gear box (1) to no more than
0.25 in. (6 mm).
Change 1
5-19