TM 5-2420-230-24-1
b. Installation.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment and injury or death to personnel may occur.
NOTE
Ensure all wires are reconnected to positions noted prior to removal.
Install cable ties as necessary.
(1)
Install wire (11), washer (10), and nut (9) on
ignition switch (3).
(2)
Install wire (8), washer (7), and nut (6) on ignition
switch (3).
(3)
Position ignition switch (3) into PDP (5).
(4)
Install nut (4) securing ignition switch (3) to
PDP (5).
(5)
Install selector (2) onto ignition switch (3).
(6)
Install screw (1) onto ignition switch (3).
c. Follow-On Maintenance.
(1)
(2)
Start engine and functionally test ignition switch
(3)
(4)
END OF TASK
Change 1
12-34