TM 5-2420-230-24-1
(5)
Install four bolts (3), washers (2), nuts (1),
and fire extinguisher bracket (4).
c. Follow-On Maintenance.
(1)
Install rocker switches (Para 12-14).
(2)
Install ignition switch (Para 12-18).
(3)
Install starter button (Para 12-22).
(4)
Install parking brake control (Para 8-10).
(5)
Install throttle control (Para 13-5).
(5.1) Install auxiliary defroster switch (Para 12-16.1).
NOTE
If replacing PDP assembly and vehicle has cold weather hit, refer to Para 20-4 for modification to PDP
assembly before proceeding.
(5.2) Install ether start pushbutton (Para 20-14).
(6)
Install belly plates as necessary (TM 5-2420-230-10).
(7)
Start engine and functionally test appropriate electrical systems for proper operation (TM 5-2420-230-10).
(8)
Shut OFF engine (TM 5-2420-230-10).
END OF TASK
12-20. CHARGE EQUALIZER REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
Tags, identification, Item 63, Appendix C
"Do Not Operate" tag attached
Ties, cable, Item 68, Appendix C
to ignition switch.
PDP door opened.
Personnel Required
Drawings Required
MOS 62B, Construction Equipment Repairer
TM 5-2420-230-24P Figure 48
References
Estimated Time to Complete Task
None.
Refer to MAC in Appendix B
Change 1
