TM 5-2420-230-24-1
a. Removal.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment and injury or death to personnel may occur.
NOTE
Remove cable ties as necessary.
(1)
Remove two screws (1) and fold down cover
plate (2).
(2)
Loosen screw and disconnect electrical
connector (3).
(3)
Loosen two screws (4).
(4)
Rotate main hydraulic master switch (5) one
quarter turn and remove.
b. Installation.
NOTE
Install cable ties as necessary.
(1)
Position main hydraulic master switch (5) and tighten two screws (4).
(2)
Connect electrical connector (3) and tighten screw.
(3)
Install cover plate (2) with two screws (1).
c. Follow-On Maintenance.
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
12-39