TM 5-2420-230-24-1
(3)
If removed, insert washer pumps (2) into
washer bottle assembly (6).
(4)
Install washer bottle assembly (6) on washer
bottle bracket (7) with two new
lockwashers (5) and bolts (4).
(5)
Install two washer hoses (3) on washer
pumps (2).
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may
result. Damage to equipment and injury or
death to personnel may occur.
(6)
Connect two wiring harness plugs (1) to
washer pumps (2).
c. Follow-On Maintenance.
(1)
Fill washer bottle assembly (6) with washer fluid (TM 5-2420-230-10).
(1)
Close engine hood and secure clips (TM 5-2420-230-10).
(1)
Start engine and functionally test front and rear washers to ensure they are operating correctly
(2)
Shut OFF engine (TM 5-2420-230-10).
(3)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
12-65
