TM 5-2420-230-24-1
d. Installation.
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may
result. Damage to equipment and injury or
death to personnel may occur.
NOTE
Install cable ties as necessary.
(1)
Install three washers (8) and bolts (7)
securing wiper motor (2) to mounting bracket (9).
(2)
Install crank arm (4) on wiper motor gearbox shaft (6) and tighten bolt (3) on crank arm (4) securing wiper
motor (2) to linkage bar (5).
(3)
Ensure all bolts are tightened.
(4)
Connect wiring harness (1) to wiper motor (2).
(5)
Relocate wiper arm to desired park position and install crank arm (4) on wiper motor gearbox shaft (6). Tighten
bolt (3) on crank arm (4) securing wiper motor (2) to linkage bar (5).
e. Follow-On Maintenance.
(1)
Install windshield defrost cover (Para 13-24).
(2)
Wiper blade replaced (Para 13-22).
(3)
Start engine and functionally test front wiper motor (TM 5-2420-230-10).
(4)
Shut OFF engine (TM 5-2420-230-10).
(5)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
12-60