TM 5-2420-230-24-1
b. Disassembly.
(1)
Remove retainer cap (1), nut (2), spacer (3), washer (4), and nut (5) from left spindle shaft (6).
(2)
Remove snap ring (7) and left spindle assembly (8) from left linkage bar (9).
(3)
Remove retainer cap (10), nut (11), spacer (12), washer (13), and nut (14) from right spindle shaft (15).
(4)
Remove snap ring (16) and right spindle assembly (17) from right linkage bar (18).
(5)
Remove snap ring (19), two washers (20), right linkage bar (18), and left linkage bar (9), from crank arm
shaft (21).
c. Assembly.
(1)
Install two washers (20), right linkage bar (18), left linkage bar (9), and snap ring (19) on crank arm shaft (21).
(2)
Install right spindle assembly (17) and snap ring (16) on right linkage bar (18).
(3)
Install nut (14), washer (13), spacer (12), nut (11), and retainer cap (10) on right spindle shaft (15).
(4)
Install left spindle assembly (8) and snap ring (7) on left linkage bar (9).
(5)
Install nut (5), washer (4), spacer (3), nut (2), and retainer cap (1) on left spindle shaft (6).
Change 1
12-59
