TM 5-2420-230-24-1
12-34.2. REMOTE SHIFT SOLENOID COIL REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanics, Item 38, Appendix B
TM or Para
Condition Description
Engine access panel removed.
Hood raised.
Materials/Parts
O-ring, Item 150.1, Appendix D (2)
Tags, identification, Item 63, Appendix C
Drawings Required
Ties, cable, Item 68, Appendix C
TM 5-2420-230-24P Figure 89
Personnel Required
Estimated Time to Complete Task
MOS 62B, Construction Equipment Repairer
Refer to MAC in Appendix B
a. Removal.
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry contacts battery
terminal, a direct short may result in instant
heating of tools, damage to equipment, and
injury or death to personnel.
NOTE
Tag all wires, and note their positions
before removal.
Remove cable ties as necessary.
All five solenoid coils are removed in the
same manner.
(1)
Remove nut (1) and O-ring (2) from spool
cartridge (3). Discard O-ring.
(2)
Remove solenoid coil (4) and O-ring (5)
from spool cartridge (3). Discard O-ring.
(3)
Disconnect solenoid coil (4) from wiring
harness (6).
Change 1
