TM 5-2420-230-24-1
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
"Do Not Operate" tag attached
to ignition switch.
Tow hitch removed.
Personnel Required
MOS 62B, Construction Equipment Repairer
Drawings Required
References
None
Estimated Time to Complete Task
a. Removal.
(1)
Remove four self-locking nuts (1), bolts (2),
and washers (3) from tow pintle (4). Discard
self-locking nuts.
(2)
Remove tow pintle (4) from tow hitch (5).
b. Installation.
Install tow pintle (4) onto tow hitch (5) with four
bolts (2), washers (3), and new self-locking
nuts (1).
c. Follow-On Maintenance.
(1)
(2)
Remove "Do Not Operate" tag from ignition
END OF TASK
0
Change 1