TM 5-2420-230-24-1
16-3. RESTORE IHMEE TO OPERATIONAL READINESS.
Upon completion of maintenance activities, restore power and return vehicle to operational readiness using the following
procedure:
(1)
Place electrical master switch in ON position (TM 5-2420-230-10).
(2)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
(3)
Ensure parking brake is applied (TM 5-2420-230-10).
(4)
Start engine (TM 5-2420-230-10).
(5)
Raise FEL, remove maintenance arm, and lower FEL to ground or travel position as required
(6)
Complete necessary documents and return IHMEE to relevant authority.
16-4. STABILIZER ARM MAINTENANCE.
This Task Covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Field, maintenance, basic, Item 23, Appendix B
TM or Para
Condition Description
Tool kit, common no. 2, Item 36, Appendix B
Stabilizer lowered.
Tool kit, general mechanics, Item 38, Appendix B
Hydraulic system pressure
Equipment, suitable lifting
released.
Materials/Parts
Drawings Required
Grease, automotive and artillery, Item 30, Appendix C
TM 5-2420-230-24P Figure 164
Grease, electrical, Item 32, Appendix C
Estimated Time to Complete Task
Refer to MAC in Appendix B
Personnel Required
MOS 62B, Construction Equipment Repairer (2)
Change 1