TM 5-2420-230-24-1
b. Installation.
NOTE
Ensure all hoses are reconnected to positions noted prior to removal.
Install cable ties as necessary.
Ensure hoses are clean and contain no foreign matter.
(1)
Install elbow (8), if necessary.
(2)
Install new gasket (7) on air compressor (3).
(3)
Install air compressor (3) with two washers (5) and nuts (4) on engine studs (6). Torque nuts to 57 lbf/ft (77 Nm).
(4)
Install oil supply line (2) at bottom of air compressor (3).
(5)
Install air supply line (1).
c. Follow-On Maintenance.
(1)
Install power steering pump (Para 5-8).
(2)
Install air governor (Para 15-9).
(2.1) Install left fender, if required (Para 13-16).
(3)
Start engine and functionally test pneumatic system (TM 5-2420-230-10).
(4)
Shut OFF engine (TM 5-2420-230-10).
END OF TASK
15-11. AIR DRIER REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Special Tools
Equipment Condition
Tool kit, general mechanics, Item 38, Appendix B
TM or Para
Condition Description
Air system drained.
Left front belly plate removed.
Materials/Supplies
Cap and plug set, Item 4, Appendix C
Tags, identification, Item 63, Appendix C
Drawings Required
Ties, cable, Item 68, Appendix C
TM 5-2420-230-24P Figure 132
Personnel Required
Estimated Time to Complete Task
MOS 62B, Construction Equipment Repairer
Refer to MAC in Appendix B
Change 1