TM 5-2420-230-24-1
d. Follow-On Maintenance.
(1)
Lower hood (TM 5-2420-230-10).
(2)
Lower FEL.
(3)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
15-10. AIR COMPRESSOR REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Pan, drain, Item 29, Appendix B
TM or Para
Condition Description
Tool kit, common no. 2, Item 36, Appendix B
Left fender removed, if required.
Tool kit, general mechanics, Item 38, Appendix B
Air governor removed.
Power steering pump removed.
Materials/Parts
Cap and plug set, Item 4, Appendix C
Gasket, Item 70, Appendix D
Drawings Required
Tags, identification, Item 63, Appendix C
TM 5-2420-230-24P Figure 122
Ties, cable, Item 68, Appendix C
Estimated Time to Complete Task
Personnel Required
Refer to MAC in Appendix B
MOS 62B, Construction Equipment Repairer
a. Removal.
NOTE
Ensure all hoses are disconnected and
clear before removal.
Tag all hoses and note their positions
before removal.
Cap and plug all hoses and fittings upon
removal.
Remove cable ties as necessary.
(1)
Remove air supply line (1).
(2)
Remove oil supply line (2) at bottom of air
compressor (3).
(3)
Remove two nuts (4) and washers (5) from
engine studs (6).
(4)
Remove air compressor (3) and gasket (7). Discard gasket.
(5)
Remove elbow (8), as necessary.
Change 1