TM 5-2420-230-24-1
15-9. AIR GOVERNOR REPLACEMENT.
This Task Covers:
a. Removal
c. Installation
d. Adjustment
b. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Equipment Condition
Special Tools
TM or Para
Condition Description
Tool kit, general mechanics, Item 38, Appendix B
Hood raised.
FEL raised and maintenance
Materials/Supplies
arm installed.
Cap and plug set, Item 4, Appendix C
Air system drained.
Tags, identification, Item 63, Appendix C
Ties, cable, Item 68, Appendix C
Drawings Required
TM 5-2420-230-24P Figure 123
Personnel Required
Estimated Time to Complete Task
MOS 62B, Construction Equipment Repairer
Refer to MAC in Appendix B
Ensure air pressure is drained to 0 psi (0 kPa) before taking off any air components. If pressure is not
released, components could blow off and harm personnel. The IHMEE air system is pressurized to 119 psi
(820 kPa). Do not drain air from a tank with any part of body in air spray path. Skin embolisms and/or debris
in eyes can occur from released pressure. Failure to comply may result in injury or death to personnel.
a. Removal.
NOTE
Tag all hoses, wires, and tubes and note their positions before removal.
Remove cable ties as necessary.
Cap and plug all tubes, hoses, and fittings upon removal.