TM 5-2420-230-24-1
(12) Remove two T-fittings (37).
(13) Remove four bolts (38), clamps (39), and two
tubes (40) from left FEL arm.
(14) Remove pin (41), spacer (42), and locking
clevis (43).
c. Inspection.
(1)
Inspect FEL arm assembly for damaged or
broken welds.
(2)
Inspect pins and bushings for damage. Replace
damaged pins or bushings (Para 17-6).
(3)
Ensure pins and bushings are adequately
lubricated.
d. Assembly.
FEL arm assembly weighs approximately
1,543 lb. (700 kg). Ensure FEL arms are
directly supported before disassembly. Failure
to comply may result in serious injury or death
to personnel.
NOTE
Ensure all hoses, wires, and tubes are reconnected to positions noted prior to removal.
Install cable ties as necessary.
(1)
Install locking clevis (43) with spacer (42) and pin (41).
(2)
Install two tubes (40) on left FEL arm with four clamps (39) and bolts (38).
(3)
Install two T-fittings (37).
(4)
Install two tubes (36) on winch mount with two clamps (35) and bolts (34).
Change 1
