TM 5-2420-230-24-1
(5)
Install two tubes (33) on right FEL arm with
four clamps (32) and bolts (31).
(6)
Install two swivel elbows (30), elbows (29),
and quick-disconnect fittings (28).
Quick-hitch assembly is heavy. Use an
appropriate lifting device and follow safe
working procedures when lifting or moving
quick-hitch assembly. Failure to comply may
result in injury or death to personnel.
(7)
Attach lifting device and sling to quick-hitch
assembly (23).
(8)
Use lifting device to position quick-hitch
assembly (23) and install with two pins (26),
bolts (25), and nuts (24).
(9)
Install both tilt linkages (Para 10-24).
(10) Install both tilt cylinders (Para 10-23).
(11) Install two tilt cylinder hoses (27) on each
side of FEL arm assembly.
(12) Install front light wire harness (22) on each side of quick-hitch assembly (23) with four screws (21), washers (20),
and nuts (19). Position cushion clamp (18) on front light wire harness (22) and install on FEL arm with
washer (17) and bolt (16). Repeat for other FEL arm.
17-9