TM 5-2420-230-24-1
a. Removal.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment and injury or death to personnel may occur.
Hot parts can burn personnel. Let hot parts cool before starting work.
NOTE
Tag all wires and note their positions before removal.
Remove cable ties as necessary.
Cut as close to wire connector as possible.
(1)
Cut wire connector (1) from wires (2) and (3). Discard wire connector.
(2)
Cut terminal (4) from wire (5). Discard terminal.
(3)
Remove screw (6) and thermostat (7) from engine block (8).
b. Installation.
(1)
Install thermostat (7) on engine block (8) with screw (6).
(2)
Install new terminal (4) on wire (5).
(3)
Connect wires (3) and (2) with new wire connector (1).
c. Follow-On Maintenance.
(1)
(2)
END OF TASK
Change 1
20-52