TM 5-2420-230-24-1
Early Production Variation
10.
If a bolt-on retainer is used, replace the seal
ring on the retainer and install it in the piston
cavity. Install the mounting bolts (Figures 129
& 130).
Figure 129
WARNING
THE
INTERNAL TOOTH
LOCK
WASHERS MUST BE INSTALLED ON
THE MOUNTING BOLTS. FAILURE TO
USE THESE WASHERS WILL RESULT
IN A LOSS OF TORQUE AND A POSSI-
BLE LOSS OF POWER ASSIST.
Figure 130
Tighten bolts to 12 Ft./Lbs. (Figure 131).
Figure 131
K-92