TM 5-2420-230-24-2
L-14. ENGINE REPAIR (FUEL LINES REPLACEMENT).
This Task Covers:
a. Removal
b. Cleaning
c. Inspection
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Personnel Required
None
MOS 62B, Construction Equipment Repairer
Tools and Special Tools
References
Tool kit, common no. 2, Item 36, Appendix B
None
Tool kit, general mechanics, Item 38, Appendix B
Equipment Conditions
Materials/Parts
TM or Para
Condition Description
Solvent, degreasing, Item 58, Appendix C
Hood raised.
Seal, banjo connect, Item 238, Appendix D (6)
Washer, locking, Item 287, Appendix D
Drawings Required
TM 5-2420-230-24P Figure 33
Estimated Time to Complete
Refer to MAC in Appendix B
a. Removal.
No smoking, flames, sparks, or glowing or hot objects allowed within 50 ft. (15 m) of vehicle.
Failure to comply may result in injury or death to personnel.
To prevent possible injury, wear gloves and protective eye equipment when handling fuel. Failure
to comply may result in injury or death to personnel.
Keep a fire extinguisher within easy reach when working with fuel or on a fuel system.
Do not work on fuel system when engine is hot; fuel can be ignited by a hot engine.
(1)
Remove injection pump supply line (1) from
injection pump (2).
Change 1