TM 5-2420-230-24-2
b. Cleaning.
Degreasing Solvent (MIL-PRF-680) is toxic and flammable. Keep away from heat or flame. Never
smoke when using solvent. The flashpoint for Type II Degreasing Solvent is 141 F (61 C). Wear
protective goggles, face shield, and gloves; use only in a well-ventilated area; avoid contact with
skin, eyes, and clothes; and do not breathe vapors. Failure to comply may result in injury or death
to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts eyes, immediately
flush eyes with water and get immediate medical attention.
Adhesives, solvents, and sealing compounds burn easily and give off vapors that are harmful to the
skin and clothing. To avoid injury or death, keep away from open fire when using these materials,
and use only in well-ventilated areas. If adhesives, solvents, or sealing compounds contact the skin
or clothing, wash immediately with soap and water, and rinse thoroughly. Failure to comply may
result in injury or death to personnel.
To avoid personal injury, wear protective equipment when using compressed air. Failure to comply
may result in injury or death to personnel.
(1)
Refer to page L-415 for cleaning.
(2)
Refer to page L-416 for air transfer pipe cleaning.
(3)
Refer to page L-417 for air crossover tube cleaning.
(4)
Refer to page L-417 for charge air cooler (CAC) cleaning.
c. Inspection.
(1)
Refer to page L-415 for inspection.
(2)
Refer to page L-416 for air transfer pipe inspection.
(3)
Refer to page L-417 for air crossover tube inspection.
(4)
Refer to page L-417 for charge air cooler (CAC) inspection.
d. Testing.
Refer to page L-418 for charge air cooler (CAC) pressure testing.
e. Installation.
Adhesives, solvents, and sealing compounds burn easily and give off vapors that are harmful to the
skin and clothing. To avoid injury or death, keep away from open fire when using these materials, and
use only in well-ventilated areas. If adhesives, solvents, or sealing compounds contact the skin or
clothing, wash immediately with soap and water, and rinse thoroughly. Failure to comply may result
in injury or death to personnel.
Refer to page L-190 for installation.
f. Follow-On Maintenance.
Close engine hood and attach clips (TM 5-2420-230-10).
END OF TASK
L-20
Change 1
