TM 5-2420-230-24-2
L-20. ENGINE REPAIR (PUSH RODS REPLACEMENT).
This Task Covers:
a. Removal
b. Inspection
c. Installation
d. Adjustment
e. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanics, Item 38, Appendix B
TM or Para
Condition Description
Rocker levers removed.
Materials/Parts
Solution, soap, Item 56, Appendix C
Drawings Required
Oil, lubricating, OE/HDO-30, Item 44, Appendix C
TM 5-2420-230-24P Figure 13
Personnel Required
Estimated Time to Complete
MOS 62B, Construction Equipment Repairer
Refer to MAC in Appendix B
a. Removal.
No smoking, flames, sparks, or glowing or hot objects allowed within 50 ft. (15 m) of vehicle.
Failure to comply may result in injury or death to personnel.
To prevent possible injury, wear gloves and protective eye equipment when handling fuel. Failure
to comply may result in injury or death to personnel.
Keep a fire extinguisher within easy reach when working with fuel or on a fuel system.
Do not work on fuel system when engine is hot; fuel can be ignited by a hot engine.
Refer to page L-110 for removal.
b. Inspection.
Refer to page L-297 for inspection.
c. Installation.
Refer to page L-182 for installation.
d. Adjustment.
Refer to page L-186 for valve clearance adjustment.
e. Follow-On Maintenance.
Install rocker levers (Para L-19).
END OF TASK