TM 5-3805-280-24-2
Crankshaft, Main Bearings and Flywheel
15
5. Using JDG22 Slide Hammer Puller, extract seal case.
31
RG,15,DT7447 1914NOV979/9
CLEAN AND INSPECT CRANKSHAFT
FLANGE
1. Clean OD of crankshaft flange and ID of flywheel
housing with cleaning solvent, trichloroethylene,
acetone, or any other suitable cleaner that will remove
sealant.
2. Look for nicks or burrs on wear ring surface and bore
in flywheel housing. If necessary, use polishing cloth to
remove nicks or burrs.
Finish cleaning by wiping flange with a clean rag.
3. Measure crankshaft flange and compare to
specifications below.
Rear Crankshaft Flange--Specification
OD ............................................................................. 55.387--55.413 mm
(2.1806--2.1816 in.)
DPSG,OUO1004,75
1923APR981/1
13-209