TM 5-3805-294-23-1
FIELD MAINTENANCE
DTC 3510.03 - SENSOR SUPPLY #2 VOLTAGE OUT OF RANGE HIGH
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Volume 3, WP 0345
(Volume 5, WP 0796, Table 2, Item 119)
Volume 3, WP 0362
Accessory Kit, MSD Electronic Equipment
Volume 3, WP 0369
(Volume 5, WP 0796, Table 2, Item 2)
Volume 4, WP 0508
Multimeter, Digital
Volume 4, WP 0509
(Volume 5, WP 0796, Table 2, Item 77)
Volume 4, WP 0510
Probe Set, Standard
Volume 5, WP 0800
(Volume 5, WP 0796, Table 2, Item 91)
Test Set, MSD Electronic Systems
Equipment Condition
(Volume 5, WP 0796, Table 2, Item 116)
Machine safely parked and shut down (TM
5-3805-294-10). (Volume 5, WP 0794)
Personnel Required
Test Equipment Setup for MSD and Service
Construction Equipment Repairer 91L (2)
ADVISOR. (Volume 3, WP 0375)
References
TM 5-3805-294-10 (Volume 5, WP 0794)
Troubleshooting Sequence
DTC 3510.03
When DTC is Displayed
Whenever the ignition is on and the error is active.
Related Information
The ECU detects a supply voltage greater than 5.26 volts on the Sensor Supply #2 circuit.
There are two outputs from this supply. One from J01 and the other from J03. The outputs on J01 are currently not
connected to any components.
Alarm Level
Warning.
Sensors Using Sensor Supply #2 Voltage from ECU connector J01:
Currently None.
Sensors Using Sensor Supply #2 Voltage from ECU connector J03
Intake Manifold Air Pressure Sensor.
Engine Oil Pressure Sensor.
0107-1