TM 5-3805-294-23-1
0137
Table 1. DTC 13311.04 - Fuel Level Sensor Open Circuit - Continued.
Test or Inspection
Corrective Action
Malfunction
Visually inspect monitor
1.
If damaged or has loose pins,
5.
Monitor Controller
controller for damage and
replace monitor controller.
Has Damage or
loose pins. (Volume 5,
Loose Pins.
(Volume 4, WP 0519) Restore
WP 0800, Figure 218)
machine to original condition.
Clear and refresh DTCs.
(Volume 3, WP 0362)
2.
If not damaged and does not
have loose pins, proceed to
Malfunction 6.
Using a jumper wire, measure
1.
If continuity is present, replace
6.
Open Circuit
resistance (Volume 3,
monitor controller. (Volume 4,
Between Connector
X21 Socket 2 and
WP 0369) between connector
WP 0518) Restore machine to
Connector B18
X21 socket 2 (Volume 5,
original condition. Clear and
Socket 1.
refresh DTCs. (Volume 3,
WP 0800, Figure 88) and
connector B18 socket 1.
WP 0362)
(Volume 5, WP 0800, Figure
2.
If continuity is not present,
13) Note reading.
proceed to Malfunction 7.
1.
Disconnect the following:
7.
Connector X3 Has
Damage or Loose
a. Connector X3. (Volume
Pins/Sockets.
5, WP 0800, Figure 84)
b. Connector X4. (Volume
5, WP 0800, Figure 85)
c. Connector X41.
(Volume 5, WP 0800,
Figure 102)
d. Connector X42.
(Volume 5, WP 0800,
Figure 103)
2.
Unmount and reposition the
cab wiring harness connectors
for service. (Volume 3,
WP 0312)
0137-3