TM 5-3805-294-23-4
0498
HARNESS INSTALLATION
WARNING
Ensure electrical power is off prior to working on all electrical connections. Prior to working
on or around vehicle, remove all jewelry, such as rings, ID tags, bracelets, etc. Jewelry, and
tools can catch on equipment, contact positive electrical circuits, and cause a direct short,
severe burns, or electrical shock. Failure to comply may result in injury or death to personnel.
NOTE
Install tie wraps as required.
1.
Install harness (Figure 8, Item 2) to mounting bracket (Figure 8, Item 6) at five tie locks (Figure 8, Item 9).
9
6
2
HYEX01814
Figure 8. Harness Installation.
2.
Connect two right connectors of harness (Figure 9, Item 2) to right front cab work light wires connectors E6
(Figure 9, Item 8).