TM 5-3805-294-23-4
FIELD MAINTENANCE
MACHINE WIRING HARNESS FUSE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive (Volume
Machine safety parked and shut down (TM
5, WP 0796, Table 2, Item 119)
5-3805-294-10). (Volume 5, WP 0794)
Negative battery cable disconnected. (WP 0521)
Materials/Parts
Tie Wraps (Volume 5, WP 0797, Table 1, Item
Time to Complete
56)
0.2 Hour(s)
Personnel Required
Construction Equipment Repairer (1)
References
TM 5-3805-294-24P: Fig. 81 (Volume 5,
WP 0794)
REMOVAL
WARNING
Ensure electrical power is off prior to working on all electrical connections. Prior to working
on or around vehicle, remove all jewelry, such as rings, ID tags, bracelets, etc. Jewelry, and
tools can catch on equipment, contact positive electrical circuits, and cause a direct short,
severe burns, or electrical shock. Failure to comply may result in injury or death to personnel.
NOTE
Fuses F60 and F61 are removed the same way.
Note position of each tie wrap and remove as required.
1.
Remove three screws (Figure 1, Item 1), washers (Figure 1, Item 2), and cover (Figure 1, Item 3) from panel
(Figure 1, Item 4).
0515-1