TM 5-2420-230-24-1
d. Follow-On Maintenance.
(1)
Start engine and check for leaks (TM 5-2420-230-10).
(2)
Shut OFF engine, wait 5 min., then check oil level with dipstick. Add oil as necessary (TM 5-2420-230-10).
(3)
Install belly plates (TM 5-2420-230-10).
END OF TASK
4-6. DRIVE BELT REPLACEMENT.
This Task Covers:
a. Removal
b. Inspection
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
Cloth, lint-free, Item 10, Appendix C
"Do Not Operate" tag attached
to ignition switch.
Hood raised.
Personnel Required
MOS 62B, Construction Equipment Repairer
Drawings Required
TM 5-2420-230-24P Figure 7
References
None
TM 5-2420-230-24P Figure 8
TM 5-2420-230-24P Figure 9
Estimated Time to Complete
Refer to MAC in Appendix B
Change 1
