TM 5-2420-230-24-1
4-3. RESTORE IHMEE TO OPERATIONAL READINESS.
Upon completion of maintenance activities, restore power and return vehicle to operational readiness by doing the following:
(1)
Place electrical master switch in ON position (TM 5-2420-230-10).
(2)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
(3)
Ensure parking brake is applied (TM 5-2420-230-10).
(4)
Start engine (TM 5-2420-230-10).
(5)
Ensure hydraulics are set to CROSS COUNTRY DRIVING mode (TM 5-2420-230-10).
(6)
Raise FEL, remove maintenance arm, and lower FEL to ground or travel position, as required
4-4. ENGINE OIL SERVICE AND FILTER REPLACEMENT.
This Task Covers:
a. Draining
b. Replacement
c. Filling
d. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
Tools and Special Tools
ground.
Pan, drain, Item 29, Appendix B
Parking brake applied.
Tool kit, common no. 2, Item 36, Appendix B
Engine shut OFF.
Tool kit, general mechanics, Item 38, Appendix B
Electrical master switch OFF.
"Do Not Operate" tag attached
Materials/Parts
to ignition switch.
Cloth, lint-free, Item 10, Appendix C
Engine hood opened.
Oil, lubricating, Item 44, Appendix C
Filter, element, fluid, Item 48, Appendix D
Drawings Required
TM 5-2420-230-24P Figure 15
Personnel Required
TM 5-2420-230-24P Figure 21
MOS 62B, Construction Equipment Repairer
References
Estimated Time to Complete
None
Refer to MAC in Appendix B
a. Draining.
Serious damage to engine can occur by operating engine with incorrect quantity of oil in sump. Failure
to comply may result in damage to equipment.
(1)
Ensure engine has reached normal operating temperature.
Change 1