TM 5-2420-230-24-1
a. Removal.
NOTE
Remove cable ties as necessary.
(1)
Open PDP doors.
(2)
Loosen nut (1) and washer (2) from hand
control (3).
(3)
Loosen nut (5) and remove cable (6) from
PDP (4) to accelerator pedal.
(4)
Remove hand throttle (3) from PDP (4).
b. Installation.
NOTE
Install cable ties as necessary.
(1)
Route cable (6) from accelerator pedal
through PDP (4).
(2)
Tighten nut (5).
(3)
Install hand throttle (3) to PDP (4).
(4)
Install washer (2) and nut (1) onto hand
throttle (3).
c. Follow-On Maintenance.
Install belly plates (TM 5-2420-230-10).
END OF TASK
Change 1
13-4
