TM 5-2420-230-24-1
b. Installation.
(1)
If removed, install latch (6).
(2)
Install boom lock pedal (14) and four bolts (15), eight washers (16) and four new self-locking nuts (17). Tighten
self-locking nuts.
(3)
Install boom lock pedal cable (11) on boom lock pedal (14).
(4)
Install cable guide (13) on boom lock pedal cable (11).
(5)
Install new brass self-locking nut (12) on cable guide (13).
(6)
Install new self-locking nut (10), washer (9), boom lock pedal cable mount (4), washer (8), and new
self-locking nuts (7) on boom lock pedal cable (11).
(7)
Install bolt (1), two washers (2), new self-locking nut (3), boom lock pedal cable mount (4), and spring bracket
lock (5) on latch (6).
c. Adjustment.
NOTE
The boom lock pedal cable needs to have approximately 0.13 to 0.25 in. (3 to 6 mm) free play to
function properly.
(1)
To tighten boom lock pedal cable:
(a)
Loosen self-locking nut (10) and tighten
self-locking nut (7).
(b)
Tighten self-locking nut (10).
(2)
To loosen boom lock pedal cable:
(a)
Loosen self-locking nut (7) and tighten
self-locking nut (10).
(b)
Tighten self-locking nut (7).
Change 1
13-6