TM 5-2420-230-24-1
13-6. BOOM LOCK PEDAL AND CABLE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Adjustment
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Test Equipment
None
TM or Para
Condition Description
Vehicle positioned on level
Tools and Special Tools
ground.
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Materials/Parts
Electrical master switch OFF.
Nut, self-locking, Item 109, Appendix D (6)
"Do Not Operate" tag attached
Nut, self-locking, Item 111, Appendix D
to ignition switch.
Nut, self-locking, brass, Item 127, Appendix D
Drawings Required
Personnel Required
TM 5-2420-230-24P Figure 165
MOS 62B, Construction Equipment Repairer
References
Estimated Time to Complete Task
None
Refer to MAC in Appendix B
a. Removal.
(1)
Remove bolt (1), two washers (2), self-locking nut (3), boom lock pedal cable mount (4), and spring bracket
lock (5) from latch (6). Discard self-locking nut.
(2)
Remove self-locking nut (7), washer (8), washer (9), self-locking nut (10), and boom lock pedal cable mount (4)
from boom lock pedal cable (11). Discard self-locking nuts.
(3)
Remove brass self-locking nut (12) from cable guide (13). Discard brass self-locking nut.
(4)
Remove cable guide (13) from lock pedal cable (11).
(5)
Remove boom lock pedal cable (11) from boom lock pedal (14).
(6)
Remove four bolts (15), eight washers (16), four self-locking nuts (17), and boom lock pedal (14). Discard
self-locking nuts.
(7)
If required, remove latch (6).
Change 1