TM 5-2420-230-24-1
(14) Remove four nuts (42), washers (43) and isolators (15) from arctic heater box (2).
(15) Remove grommet (44) from arctic heater box (2).
(16) Remove four nuts (45), screws (46), and two box mounting brackets (16) from fuel step plate (47).
c. Assembly.
NOTE
Ensure all hoses, wires, and tubes are
reconnected to positions noted prior to
removal.
Install cable ties as necessary.
Perform Steps (1) through (7) as
necessary for parts removed in
disassembly.
(1)
Install two box mounting brackets (16) on
fuel step plate (47) with four screws (46) and
nuts (45).
(2)
Install grommet (44) on arctic heater box (2).
(3)
Install isolators (15) on arctic heater box (2)
with four washers (43) and nuts (42).
NOTE
Auxiliary connector on harness is not used.
(4)
Install wire harness (41) on arctic heater
box (2) with four washers (40) and
screws (39).
(5)
Install grommet (38) on arctic heater box (2).
(6)
Position four clamps (20) and (37) on two
coolant hoses (28).
(7)
Install two coolant hoses (28) on arctic heater box (2) with clamps (37).
Change 1
20-22