TM 5-2420-230-24-2
Injection Pump - Installation (0-88)
Section 0 - Engine Disassembly and Assembly - Group 00
Page 0-76
B Series Shop Manual
Unlocked CAV Injection Pump - Installation
(0-91)
Locate Top Dead Center (TDC) for Cylinder Number 1 by
barring the engine while pushing in on the timing pin until
it engages.
If the shaft of a Lucas CAV pump was not locked with the
engine at TDC, rotate the pump shaft to align the key and
the keyway in the gear.
Secure the pump by finger tightening the three mounting
nuts.
Disengage the TDC pin.
22 mm
Secure the drive gear with the mounting nut and lock
washer.
[48 ft-lb]
L-165