TM 5-3805-281-24-2
Hydraulic System
REMOVE AND INSTALL BUCKET CYLINDER
33
1. Park machine on a firm, level surface.
3360
157
2. Retract arm cylinder and bucket cylinder (B). Lower
boom so bucket is on ground and end of arm (C) is on
a wooden block (D).
3. Stop engine.
B--Bucket Cylinder
C--Arm
D--Wooden Block
CED,OUOE026,11 1918JUN981/5
CAUTION: The hydraulic oil tank is pressurized.
High pressure release of oil from pressurized
system can cause serious burns or penetrating
injury. Release pressure from tank by loosening
vent plug. It is not necessary to remove vent
plug.
4. Loosen vent plug (A) to release hydraulic pressure in
reservoir.
A--Vent Plug
Continued on next page
CED,OUOE026,11 1918JUN982/5