TM 5-3805-294-23-4
FIELD MAINTENANCE
RIFLE MOUNT AND GUARD BAR REPLACEMENT
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
TM 5-3805-295-13&P (Volume 5, WP 0794)
DA FORM 5988-E or DA FORM 2404 (Volume 5,
(Volume 5, WP 0796, Table 2, Item 119)
WP 0794)
Materials/Parts
Sealing Compound, Thread Lock
Equipment Condition
Machine safely parked and shut down
(Volume 5, WP 0797, Table 1, Item 43)
(TM 5-3805-294-10). (Volume 5, WP 0794)
Locknut (Volume 5, WP 0798, Table 1, Item 25)
Qty: 2
Lockwasher (Volume 5, WP 0798, Table 1, Item
Time to Complete
17) Qty: 2
0.8 Hour(s)
Screw (Volume 5, WP 0798, Table 1, Item 71)
Qty: 2
Personnel Required
Construction Equipment Repairer 91L (1)
References
TM 5-3805-294-24P: Fig. 116 (Volume 5,
WP 0794)
REMOVAL
NOTE
If HYEX is equipped with a Supplemental Armor Set, refer to and use procedure found in TM
5-3805-295-13&P.
1.
Remove two hand knobs (Figure 1, Item 1), washers (Figure 1, Item 2), clamp mount (Figure 1, Item 3), and
clamp plate (Figure 1, Item 4) from guard bars (Figure 1, Item 5).
0577-1