TM 5-3805-294-23-4
FIELD MAINTENANCE
ARM IN PRESSURE SENSOR REPLACEMENT
INITIAL SETUP:
Personnel Required
Tools and Special Tools
Construction Equipment Repairer 91L (1)
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP 0796, Table 2, Item 119)
Cap and Plug Set (Volume 5, WP 0796, Table 2,
References
Item 55)
TM 5-3805-294-24P: Fig. 197 (Volume 5,
Gloves, Rubber (Volume 5, WP 0796, Table 2,
WP 0794)
Item 55)
DA FORM 5988-E or DA FORM 2404 (Volume 5,
Goggles, Industrial (Volume 5, WP 0796, Table 2,
WP 0794)
Item 58)
Pan, Drain (Volume 5, WP 0796, Table 2, Item
55)
Equipment Condition
Machine safely parked and shut down
(TM 5-3805-294-10). (Volume 5, WP 0794)
Materials/Parts
Negative battery cable disconnected. (WP 0521)
Lubricating Oil, Engine OE/HDO 15W-40
Center Top Cover Removed. (WP 0589)
(Volume 5, WP 0797, Table 1, Item 18)
Hydraulic system pressure relieved. (Volume 5,
Rags, Wiping (Volume 5, WP 0797, Table 1, Item
WP 0767)
34)
Tags (Volume 5, WP 0797, Table 1, Item 52)
Tie Wraps (Volume 5, WP 0797, Table 1, Item
Time to Complete
56)
1.1 Hour(s)
O-ring (Volume 5, WP 0798, Table 1, Item 150)
Qty: 1
REMOVAL
WARNING
WARNING
Ensure electrical power is off prior to working on all electrical connections. Prior to working
on or around vehicle, remove all jewelry, such as rings, ID tags, bracelets, etc. Jewelry
and tools can catch on equipment, contact positive electrical circuits, and cause a direct
short, severe burns, or electrical shock. Failure to comply may result in injury or death to
personnel.
0625-1