TM 5-2420-230-24-1
(1)
Place drain pan beneath hydraulic hoses (1).
Hydraulic fluid (Dexron III) is TOXIC. Wear
protective goggles and gloves; use only in
well-ventilated area; avoid contact with skin,
eyes, and clothes. Skin and clothing that
come in contact with hydraulic oil should be
washed immediately. Saturated clothing
should be removed immediately. Failure to
comply may result in injury to personnel.
(2)
Disconnect two hydraulic hoses (1) from tilt
cylinder (2).
(3)
Remove two self-locking nuts (3),
washers (4), and bolts (5) from outside pivot
arm (6). Remove pivot arm (5). Discard
self-locking nuts.
(4)
Rotate tilt linkage (7) on bucket (8).
(5)
Set tilt cylinder (2) on FEL arm (9).
(6)
Attach suitable lifting device and sling to tilt
cylinder (2)
Hydraulic cylinder is heavy. Use an
appropriate lifting device and follow safe
working procedures when lifting or
moving hydraulic cylinder. Failure to
comply may result in injury or death to
personnel.
Use care when removing or installing snap and retaining rings. Snap and retaining rings are under
spring tension and can act as projectiles when released and could cause severe eye injury.
(7)
Remove circlip (10) from rod pin (11) and remove rod pin (11) from FEL arm (9) and tilt cylinder (2).
(8)
Remove tilt cylinder (2) from FEL arm (9).
b. Disassembly.
(1)
Remove clamp (12) from tilt cylinder (2).
(2)
Disconnect two hoses (13) from tilt cylinder (2).
(3)
Remove two elbows (14) from tilt cylinder (2).
Change 1
10-51
