TM 5-2420-230-24-1
10-33. HOSE REEL VALVE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanics, Item 38, Appendix B
TM or Para
Condition Description
Hose reel removed.
Materials/Parts
Cap and plug set, Item 4, Appendix C
Nut, self-locking, Item 109, Appendix D
Drawings Required
Tags, identification, Item 63, Appendix C
TM 5-2420-230-24P Figure 184
Ties, cable, Item 68, Appendix C
Estimated Time to Complete Task
Personnel Required
Refer to MAC in Appendix B
MOS 62B, Construction Equipment Repairer
a. Removal.
Hydraulic fluid (Dexron III) is TOXIC. Wear protective goggles and gloves; use only in well
ventilated area; avoid contact with skin, eyes, and clothes. Skin and clothing that come in contact with
hydraulic oil should be washed immediately. Saturated clothing should be removed immediately.
Failure to comply may result in injury to personnel.
NOTE
Tag all hoses and tubes and note their positions before removal.
Cap and plug all tubes, hoses, and fittings upon removal.
Remove cable ties as necessary.
(1)
Remove tube (1) from elbow (2) and
T-fitting (3).
(2)
Remove tube (4) from adaptors (5) and (6).
(3)
Remove hose (7) from adaptor (8).
(4)
Remove two self-locking nuts (9), washers (10),
screws (11), and valve assembly (12) from hose
reel (13). Discard self-locking nuts.
(5)
Remove elbow (2) and adaptors (5) and (8)
from valve assembly (12). Inspect O-rings on
adaptors. Replace any adaptor with a damaged
O-ring.
10-83
Change 1