TM 5-2420-230-24-1
NOTE
When hose stop is at rest on hose reel rollers, pawl should not be engaged.
Ensure hose stop is positioned approximately 16 in. (400 mm) from end of hose assembly.
(8)
Unwind hose assembly (4) through roller
assembly (5) until able to install hose
stop (3).
(9)
Install hose stop (3) on hose assembly (4)
with two screws (2) and nuts (1).
c. Follow-On Maintenance.
(1)
Connect hose reel and check for proper
operation and leaks (TM 5-2420-230-10).
(2)
Stow hose reel (TM 5-2420-230-10).
(3)
Remove "Do Not Operate" tag from ignition
switch (TM 5-2420-230-10).
END OF TASK
10-32. HOSE REEL SWITCH REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
Nut, self-locking, Item 108, Appendix D (2)
"Do Not Operate" tag attached
Tags, identification, Item 63, Appendix C
to ignition switch.
Ties, cable, Item 68, Appendix C
Drawings Required
TM 5-2420-230-24P Figure 42
Personnel Required
MOS 62B, Construction Equipment Repairer
TM 5-2420-230-24P Figure 184
References
Estimated Time to Complete Task
None
Refer to MAC in Appendix B
Change 1