TM 5-2420-230-24-1
(3)
Install roller (17) and mounting blocks (10) on bracket (4) with two screws (16) and nuts (15).
(4)
Install two sleeve bearings (14) and rod (13)
on roller (7).
(5)
Install two sleeve bearings (12) and rod (11)
on roller (6).
(6)
Install two rollers (7) and (6) on two
mounting blocks (10).
(7)
Install two sleeve bearings (9) and rods (8)
on roller (5).
(8)
Install two mounting blocks (3) on roller (5).
(9)
Install roller (5) and mounting blocks (3) on
rollers (6) and (7).
(10) Install mounting blocks (3) on bracket (4) with two screws (2) and nuts (1).
c. Follow-On Maintenance.
(1)
Install hose reel cover (TM 5-2420-230-10).
(2)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
10-76
