TM 5-2420-230-24-1
(3)
Remove two mounting blocks (3) from roller (5).
(4)
Remove two rods (8) and sleeve bearings (9) from roller (5).
(5)
Remove rollers (6) and (7) from two
mounting blocks (10).
(6)
Remove rod (11) and two sleeve
bearings (12) from roller (6).
(7)
Remove rod (13) and two sleeve
bearings (14) from roller (7).
(8)
Remove two nuts (15), screws (16),
mounting blocks (10), and roller (17) from
bracket (4).
(9)
Remove mounting blocks (10) from
roller (17).
(10) Remove two pins (18) and sleeve bearings (19) from roller (17).
b. Installation.
NOTE
Ensure hose stop is positioned outside of bracket before installing rollers.
(1)
Install two sleeve bearings (19) and pins (18) on roller (17).
(2)
Install two mounting blocks (10) on roller (17).
10-75
Change 1