TM 5-2420-230-24-1
c. Installation.
Steps in the installation of an electrical harness are the reverse of those in the removal procedure with attention given to
the following points:
NOTE
Ensure all wires are reconnected to positions noted prior to removal.
Install cable ties as necessary.
(1)
Ensure harness is routed correctly.
(2)
Ensure securing clamps and mounting hardware are replaced.
(3)
Align connectors, plugs, or pins, and ensure they are correctly connected.
d. Follow-On Maintenance.
(1)
Start engine (TM 5-2420-230-10) and check operation of electrical components to ensure harness is operating
correctly (TM 5-2420-230-10).
(2)
Shut OFF engine (TM 5-2420-230-10).
(3)
Close hood, if required (TM 5-2420-230-10).
(4)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
12-49